Home page
SPONSOR AD

Support our Vendors!  |  Advertise Here

Topic: Hood rattles on passenger side

in Forum: C4 Body


Already a Member?
Login
Not yet a Member?
Register for Free!

Hood rattles on passenger side (1/10)
 4/17/13 2:25am
BillyDee
Standard Member
Send Private Message


Vette(s):
1990 convertible corvette,owned 1 year


Joined: 8/9/2012
Posts: 51

  hello everyone i have a 1990 corvette convertible and the hood rattles on the passenger side as if its not latched down right.Whats some things for me to check..Thanks

______________
Our Sponsors help support C4VR
Re: Hood rattles on passenger side (2/10)
 4/17/13 9:18am
tbirdsps
Standard Member
Send Private Message

Ridgecrest, CA - USA

Vette(s):
1990 Coupe


Joined: 2/19/2013
Posts: 117

First a warning:
 
Don't fiddle with it unless you have a set of those emergency cables.  If it gets stuck closed or you break the normal unlatch cable it's a bugger to get open again.
 
With the hood closed you should be able to wiggle it up and down on the right side if either that side is not latching or that side is out of adjustment.  I would seem to me that something is probably loose and if so tighten the latch on the hood side or the latch is stuck open on the cowl side and for that probably just a thorough cleaning and lubrication may do the trick.  With the hood open you can easily see how the latch mechenism works.
 
I would bet on the latch  being stuck open on that side and just dirty or a little corroded.  If the cable was the problem it probably would not unlatch on that side at all.


______________
If it isn't broke, I haven't fixed it yet....
Re: Hood rattles on passenger side (3/10)
 4/17/13 1:01pm
Adams' Apple
Standard Member
Moderator
Send Private Message

Duncanville, TX - USA

Vette(s):
1985 Coupe-L98/Auto,Bright Red/Carmine. 1974 Coupe-L48/4speed, Medium Red Metallic/Black Deluxe.


Joined: 3/18/2009
Posts: 2230

tbirdsps said: First a warning: Don't fiddle with it unless you have a set of those emergency cables.  If it gets stuck closed or you break the normal unlatch cable it's a bugger to get open again.



Amen on that!! Angry
I also agree it is probably either the latch itself is not closing due to being stuck in the open position, or the receiver is adjusted too low.
Can you push down on the hood and get it to latch?
Can you pick up on that corner, like it isn't latched at all? 


______________

Joel Adams  
My Link

 
   
(click for Texas-sized view!)             NCRS

"Money can't buy happiness -- but somehow it's more comforting to cry in a CORVETTE than in a Kia"

Re: Hood rattles on passenger side (4/10)
 4/17/13 3:24pm
BillyDee
Standard Member
Send Private Message


Vette(s):
1990 convertible corvette,owned 1 year


Joined: 8/9/2012
Posts: 51

I tried cleaning and pushing down trying to latch it and it still acts as if its not fully latched.The cable seems to work ok its just not fully latching and rattles really bad when dirving.i appreciate your suggestions is there anything else that I can try...thanks again

______________
Re: Hood rattles on passenger side (5/10)
 4/24/13 3:33pm
FLDAVE
Standard Member
Send Private Message


Vette(s):
1953 1992 BLACK ON BLACK


Joined: 11/22/2009
Posts: 60

Easy peesy. First check the cable is properly adjusted. Have someone pull the release handle while you watch the release gissy move. It should move to just full open. (Do both sides while ya got her there) Adjust cable length if needed. Now here’s what your problem is. It's the conical stop (pecker head) on the hood itself. It's too far out or too long so to say. It's adjustable. Grab the pecker head and simply loosen the big flat hex nut about a turn or two. Then, turn the pecker head "in" clockwise. Try like a quarter turn at a time. (Baby steps) Just snug the nut and close the hood. When closed it should not have any play "up". This is a feel deal. You’ll know when you’re getting close. Repeat as needed. When you’re happy hold the pecker head and tighten the hex nut. No need to gorilla it. Just a tad more than snug.
This how I fixed mine anyway.
 
Good luck, Dave
Re: Hood rattles on passenger side (6/10)
 4/24/13 6:24pm
tbirdsps
Standard Member
Send Private Message

Ridgecrest, CA - USA

Vette(s):
1990 Coupe


Joined: 2/19/2013
Posts: 117

FLDAVE said: Easy peesy. First check the cable is properly adjusted. Have someone pull the release handle while you watch the release gissy move. It should move to just full open. (Do both sides while ya got her there) Adjust cable length if needed. Now here’s what your problem is. It's the conical stop (pecker head) on the hood itself. It's too far out or too long so to say. It's adjustable. Grab the pecker head and simply loosen the big flat hex nut about a turn or two. Then, turn the pecker head "in" clockwise. Try like a quarter turn at a time. (Baby steps) Just snug the nut and close the hood. When closed it should not have any play "up". This is a feel deal. You’ll know when you’re getting close. Repeat as needed. When you’re happy hold the pecker head and tighten the hex nut. No need to gorilla it. Just a tad more than snug.
This how I fixed mine anyway.
 
Good luck, Dave


Heck, that's written in language that even I can understand.... Ha Ha.

______________
If it isn't broke, I haven't fixed it yet....
Re: Hood rattles on passenger side (7/10)
 4/25/13 6:50am
martone_1
Standard Member
Send Private Message

Fernandina, FL - USA

Vette(s):
1985 Corvette Coupe


Joined: 4/9/2012
Posts: 109

Also check the rubber stops just behind latch. Mine was gone replaced it and no rattle.
Re: Hood rattles on passenger side (8/10)
 5/6/13 3:46am
BillyDee
Standard Member
Send Private Message


Vette(s):
1990 convertible corvette,owned 1 year


Joined: 8/9/2012
Posts: 51

Thanks everyone i gonna give these suggestions a try once ive done that ill let ya know.You guys ROCK and thanks so much to all my C4 buds and thanks for passing info to those of us who are going down the road.....THANKS   OOOOOOOOOOHHHHHHRRRRRRAAAAA

______________
Re: Hood rattles on passenger side (9/10)
 5/6/13 9:58pm
Dan Skopp
Standard Member
Send Private Message

Oak Creek, WI - USA

Vette(s):
1981, think about getting a 1992.


Joined: 10/11/2009
Posts: 75

Adams' Apple said:
tbirdsps said: First a warning: Don't fiddle with it unless you have a set of those emergency cables.  If it gets stuck closed or you break the normal unlatch cable it's a bugger to get open again.



Amen on that!! Angry
I also agree it is probably either the latch itself is not closing due to being stuck in the open position, or the receiver is adjusted too low.
Can you push down on the hood and get it to latch?
Can you pick up on that corner, like it isn't latched at all? 


Sounds like this Joel guy knows what he is talking 'bout!!  Tell me what you think of this 1985 that I found.  It has 29,000 original miles, blk exterion, tan interion looks brand new, "never been in the rain"  "25 coats of McGuires Paste Wax, 4 speed l98, New BFG Hi operformance tires (4) new battery, floor mats , car cover.  Owner wants 16,5000 but I may be able to get him down!!  What do you think??
Re: Hood rattles on passenger side (10/10)
 5/7/13 7:27am
Adams' Apple
Standard Member
Moderator
Send Private Message

Duncanville, TX - USA

Vette(s):
1985 Coupe-L98/Auto,Bright Red/Carmine. 1974 Coupe-L48/4speed, Medium Red Metallic/Black Deluxe.


Joined: 3/18/2009
Posts: 2230

Well...I think you prolly need to start a new thread in the "C4 General Discussion" forum, first....Wink
But since we're here....I think it's about $7000 overpriced...maybe more. Just my .002 Big smile


______________

Joel Adams  
My Link

 
   
(click for Texas-sized view!)             NCRS

"Money can't buy happiness -- but somehow it's more comforting to cry in a CORVETTE than in a Kia"

Our Sponsors help support C4VR