Home page
SPONSOR AD

Support our Vendors!  |  Advertise Here

Topic: HVAC controls

in Forum: C4 Cooling and Heating Systems


Already a Member?
Login
Not yet a Member?
Register for Free!

HVAC controls (1/3)
 10/29/10 12:01pm
jarees
Standard Member
Send Private Message

Livonia, MI - USA

Vette(s):
1994 Admiral blue coupe, LT1, automatic, with light gray leather interior, chrome ZR-1 wheels, SLP exhaust and cold air induction. Member: Corvette Club of Michigan


Joined: 11/29/2009
Posts: 8

On my 94 coupe the fan speed and temp control switches pretty much work when they want to.  What I mean is when trying to adjust the fan speed or temperature either up or down - most of the time I get to response from the switches.  Consistent pushing of the buttons will sometimes illicit a response, but not always.  If left alone for several minutes then trying again it will usually respond.  Does anyone have any suggestions on a fix?   Thanks
Our Sponsors help support C4VR
HVAC controls (2/3)
 10/29/10 6:35pm
eddie20890
Standard Member
Moderator
Send Private Message

lanoka harbor, NJ - USA

Vette(s):
1990 L-98 white/ red/black leather interior targa top auto 1975 L48 blue/black leather interior t tops auto


Joined: 3/22/2009
Posts: 1363

my 90 acts funky too. i have changed the head in the dash (partly cause i could just about read the digital display) and it still has a few quirks. sometimes when i start the car the a/c will activate, sometimes the defroster won't kick in. i believe there is another control unit in the dash board. if i come up with anything i'll let you know. hopefully  another member might have an answer.

______________


















the dynamic duo


c3vr life member #97
HVAC controls (3/3)
 10/30/10 2:22pm
wrs
Standard Member
Send Private Message

Joined: 8/19/2009
Posts: 12

on my 91 I replace the heater core #%^*$@!+!!!! and a few other words plus three days I got it all back together. Come to find out my temp.door does not work after getting no air or heat,I found out how to get the problem codes from the heater/air cond.control the code was given as a bad heater temp.door motor mulfunction.When I found out to fix or replace it I have to do the same job I just did #%^*$@!+!!!!.I talk to a gentleman at carlisle he told me if the door is sticking,hungup or the motor is bad it will not send the signal back to the controller ? he also told me to try takeing out the glove box on my model there is an air duct to move early models had the ecu there (project for spring) HOPE THIS HELP wrs
Our Sponsors help support C4VR