Home page
SPONSOR AD

Support our Vendors!  |  Advertise Here

Topic: 95 conv rear deck release button

in Forum: C4 Electrical


Already a Member?
Login
Not yet a Member?
Register for Free!

95 conv rear deck release button (1/4)
 8/1/15 7:53am
Bybassett
Standard Member
Send Private Message

Muncy, PA - USA

Vette(s):
1995 torch red conv, LT1,56k,auto,loaded with options


Joined: 3/30/2014
Posts: 32

We have a 95 conv. The rear deck release button in the console works fine. The button behind the driver seat does nothing is there a how to video available to replace this yellow push button switch
Our Sponsors help support C4VR
Re: 95 conv rear deck release button (2/4)
 8/2/15 10:16pm
ratfink18
Standard Member
Send Private Message

powhatan, VA - USA

Vette(s):
89 white bik top blk int.auto.


Joined: 4/12/2015
Posts: 12

Before you buy a switch,you have to jump out the two wires on the switch,if the rear hatch open then you can pry the switch  out  from the back ,reconnect the wires to the switch and you are done,dont need a video for everything on a c4.it is that easy.

______________
Re: 95 conv rear deck release button (3/4)
 8/13/15 5:22pm
Bybassett
Standard Member
Send Private Message

Muncy, PA - USA

Vette(s):
1995 torch red conv, LT1,56k,auto,loaded with options


Joined: 3/30/2014
Posts: 32

Good idea. I pryed out the switch and bypaßed it. No work. The wires run under the lid cover. The wires are exposed on the other side of the lid . The wires appear to be fooled with and i will short out the wires to make sure all are correct
Re: 95 conv rear deck release button (4/4)
 8/15/15 11:51am
Black Shark
Standard Member
Moderator
Send Private Message


Vette(s):
Black 1979 L-82 Black 1996 LT1 Black 1999 Coupe


Joined: 3/20/2009
Posts: 611

Bybassett said: Good idea. I pryed out the switch and bypaßed it. No work. The wires run under the lid cover. The wires are exposed on the other side of the lid . The wires appear to be fooled with and i will short out the wires to make sure all are correct



Seems silly to ask...but...you did check that switch for power into it right?
Our Sponsors help support C4VR