Home page
SPONSOR AD

Support our Vendors!  |  Advertise Here

Topic: Odometer not working after Tranny rebuild

in Forum: C4 Driveline Components


Already a Member?
Login
Not yet a Member?
Register for Free!

Odometer not working after Tranny rebuild (1/2)
 6/28/17 4:51pm
jedenrevive
Standard Member
Send Private Message

Joined: 1/6/2012
Posts: 6

I noticed after I drove away from a professional transmission rebuilder the odometer was not working.  Not knowing where the connections are, could someone have missed something putting it back together?  Also, the speedometer stopped working after about 15 miles later too? Also related? 
Our Sponsors help support C4VR
Re: Odometer not working after Tranny rebuild (2/2)
 7/1/17 10:35am
Adams' Apple
Standard Member
Moderator
Send Private Message

Duncanville, TX - USA

Vette(s):
1985 Coupe-L98/Auto,Bright Red/Carmine. 1974 Coupe-L48/4speed, Medium Red Metallic/Black Deluxe.


Joined: 3/18/2009
Posts: 2230

Speed sensor was prolly not re-connected properly. The sensor is on the driver side, rear of the trans. Check to see that it is plugged in completely. Also, look carefully to see if the wiring at the connector is good. The insulation on the wires is susceptible to deterioration, leaving you with bare wires. Regardless, the issue is with the speed sensor. Take it back to them and have them correct the problem.

The VSS/speed sensor will look similar to this one.



______________

Joel Adams  
My Link

 
   
(click for Texas-sized view!)             NCRS

"Money can't buy happiness -- but somehow it's more comforting to cry in a CORVETTE than in a Kia"

Our Sponsors help support C4VR