Topic: Distributor Vacuum lines
in Forum: C4 Engines
Bought a 96 with a LT-4 engine and as we are going through everything, the distributor vacuum lines are not connected. Getting deeper into it, am wondering which line connects to air intake and which one connects to engine vent. Thinking the smaller distributor line closer to the block is the intake line. Wondering the effect of not having it hooked up and any pointers on where to get hose kits and tricks to reconnecting without taking everything off. Thanks!
Moderator
the dynamic duo

c3vr life member #97
Moderator
the dynamic duo

c3vr life member #97
Moderator
I'm not sure it would make any difference at all which line went where...I'll see if I can pull up a diagram...
As far as the vac harness, you might try "thepartsladi" on e-bay. They have TONS of discontinued, NOS GM parts, and they go by part numbers. Since you have the GM #, they should be able totell ya pretty quick if they have it or not. Sometimes, they will also offer to help search for stuff they don't have. It's worth a crap. I know they do sell quite a few Opti-Spark distributors....
Joel Adams
My Link
(click for Texas-sized view!) NCRS
"Money can't buy happiness -- but somehow it's more comforting to cry in a CORVETTE than in a Kia"
Moderator
the dynamic duo

c3vr life member #97
Moderator


The vacuum line for the dist comes from the rear area of the intake plenum. Then the vent line from the dist goes up to the air cleaner housing somewhere. The diagram I have is not very detailed.
Joel Adams
My Link
(click for Texas-sized view!) NCRS
"Money can't buy happiness -- but somehow it's more comforting to cry in a CORVETTE than in a Kia"