I am in the middle of replacing all of the suspension bushings and sleeves and the front lower control arms are giving me fits.... 2 different problems
First, the rear bolt on the lower control arm does not have enough clearance from the frame to slide the bolt out of the assembly. It has room to slide about 2/3 the length of the bolt but then smacks up against the frame. I can't even figure out how they assembled it !
Second, on the drivers side, I can't bust either of the bolts apart..... air wrench is running with 200psi and they won't budge. Unbolted the passenger side with no problem but the drivers side won't give at all. I googled a handful of articles and there's no mention of this being a issue for anyone else nor any indication this side uses reverse threads
If anyone has any suggestions, I'm all ears
______________