Can't help you with dash cam but Innovate has an OBD interface with lots of options for logging. I use it with dual wide bands and data logger to setup my "tune-ups". (Note, Innovate says it will not work with Windows 10.) The data available is not as broad as some interfaces but the principal ones are there.
Just for info, I'm currently running a GM hot cam and below 3000 RPM the VE tables were off by as much as 30% in places. (No wonder I was having E-Test issues) Log tables are now within 1% and (Per my previous post), fixed the TPS and more. Throttle is so much crisper now. I want to get some thermocouples on the headers to find where the cylinder balance should be. Innovate has a reasonably inexpensive interface that daisy chains to the logger. The OEM tables have cylinder balances that range almost 10% so there could be significant power getting them right for any specific motor.
That said, I can see creating a AVI with dual screen of Logworks playback, sinc'd with dash video from a Go-Pro. Might have to work on that myself!
|UPDATED|11/20/2016 5:23:29 PM (AZT)|/UPDATED|
______________