Topic: question on the frame
in Forum: C4 Body
Already a Member?
Click Here to Login
Not yet a Member?
Click Here to Register for Free!
SPONSOR AD:: (Our Sponsors help support C4VR)
Standard Member
Moderator
Send PM
Moderator
Joined: 3/20/2009
Posts: 611
Vette(s): Black 1979 L-82
Black 1996 LT1
Black 1999 Coupe
you can start by measuring from center to center of the wheel on left and right sides.
Also; the gaps in fender wells should be fairly close from wheel to wheel....this is NOT an exact measurement, but anything under 3/8" can be acceptable.
to do this:
A-go to LR tire and measure gap in front of tire to fender well, do the same at rear of that tire.
B-go to RR tire and do the same
C-compare measurements
Then measure rear toe IN/OUT (plenty of how-to's on you tube for this)
These are the free checks to do at home before frame or alignment shop/fees.
fabio075 said: good morning everyone Two days ago I had an accident touched me behind now in acceleration does not go straight do not know if the frame is what someone has the outline of measures to straighten? thanks
Does any one have the specifications on the hard points on the frame so that I can determine how much my frame is bent?
in Forum: C4 Body
SPONSOR AD: (Our Sponsors help support C4VR)