Home page
SPONSOR AD

Support our Vendors!  |  Advertise Here

Topic: Carrier bolt-what is this for?

in Forum: C4 Driveline Components


Already a Member?
Login
Not yet a Member?
Register for Free!

Carrier bolt-what is this for? (1/4)
 3/14/18 1:44am
Hahnster
Standard Member
Send Private Message

Joined: 9/14/2017
Posts: 8

Can anyone tell me what the purpose of this bolt at the back of an '87 carrier is for?  I Unscrewed it thinking it was to drain the carrier which it turns out it is not for that.  I noticed there was a "rubber like" calking at the end of the bolt threads.  I would like to know what the purpose of this bolt is before I screw it back in.  Also, I guess there is no drain plug right?

Thanks a lot for any help you can provide.

John


Our Sponsors help support C4VR
Re: Carrier bolt-what is this for? (2/4)
 3/15/18 7:23am
Adams' Apple
Standard Member
Moderator
Send Private Message

Duncanville, TX - USA

Vette(s):
1985 Coupe-L98/Auto,Bright Red/Carmine. 1974 Coupe-L48/4speed, Medium Red Metallic/Black Deluxe.


Joined: 3/18/2009
Posts: 2230

Not a very clear pic, but I'm gunna guess it is one of the bolts holding the rear cover/batwing to the diff. The rubbery stuff is silicon.
And yes, you are correct...no drain plug in the diff. There are kits available to allow you to drill/tap a hole in the bottom for a drain, if you want. Otherwise, you need to get the diff hot(drive for a while), then use a suction pump/gun to draw the old lube out. When changing the diff lube, be SURE to add in a couple bottles of Posi additive. Thumbs Up


______________

Joel Adams  
My Link

 
   
(click for Texas-sized view!)             NCRS

"Money can't buy happiness -- but somehow it's more comforting to cry in a CORVETTE than in a Kia"

Re: Carrier bolt-what is this for? (3/4)
 3/15/18 9:28am
Hahnster
Standard Member
Send Private Message

Joined: 9/14/2017
Posts: 8

Thanks a lot for the information, appreciate it.
Re: Carrier bolt-what is this for? (4/4)
 3/15/18 7:44pm
manchester
Standard Member
Send Private Message

Equinunk, PA - USA

Vette(s):
1993 LT1 convertible triple black 4L60 2003 Zo6 Electron/Black 6 sp


Joined: 11/12/2017
Posts: 57

The process for drilling and tapping is very doable. Rinsed mine out twice with carb cleaner, let it drain, put the new plug. Added the two bottles of GM anti slip ointment and drove in figure 8's for about 15 minuets. my noise was gone and clutches work very well.
Our Sponsors help support C4VR