Home page

Topic: information on the 700r4 transmission valve body plate

in Forum: C4 Driveline Components

information on the 700r4 transmission valve body plate (1/2)
 6/5/20 8:19am
fabio075
Standard Member
Send Private Message

Joined: 1/23/2012
Posts: 27

hi i bought a trango valve plate and would like to ask some things

therefore in the point marked by the letter "A" the hole must be closed if I'm not mistaken

the hole "B" on the old plate is to be done also on the new one?

so on the letter "C" on the new plate it has 2 holes and on the vetch it has a bigger hole one must be asked?

therefore the hole indicated with the letter "D" on the new plate is slightly smaller

Thank you

Our Sponsors help support C4VR
Re: information on the 700r4 transmission valve body plate (2/2)
 6/19/20 12:16pm
Adams' Apple
Standard Member
Moderator
Send Private Message

Duncanville, TX - USA

Vette(s):
1985 Coupe-L98/Auto,Bright Red/Carmine. 1974 Coupe-L48/4speed, Medium Red Metallic/Black Deluxe.


Joined: 3/18/2009
Posts: 2147

Hard to see the pic. Normally, the T-Go  plates are "universal", for the most part, and will fit several different versions of the trans. Both of the plates you show will fit Auxiliary valve body transmissions('87-up). Some of the holes in the non-Aux VB plate are not needed on Aux VB transmissions, so the holes missing are not an issue. What part number did you order, and what year model is the trans? If you bought this plate from T-Go, or new from some other supplier, the instructions should be with it.

Trans-Go 700-P plate



|UPDATED|6/19/2020 9:16:50 AM (AZT)|/UPDATED|


______________
Joel Adams  
My Link

 
   
(click for Texas-sized view!)             NCRS

"Money can't buy happiness -- but somehow it's more comforting to cry in a CORVETTE than in a Kia"
Our Sponsors help support C4VR