Topic: Fixed the switch!!
in Forum: C4 Electrical
Already a Member?
Click Here to Login
Not yet a Member?
Click Here to Register for Free!
My passenger door switch, you know the one on the jamb. It had broken off so it wasn't working. Luckily there were no lost parts. I removed the door panel and unbolted the remains from the door.
I super glued it back together being careful not to get any glue on the plunger. I coated the plunger with a little WD-40 then glued it back together. Because of the spring my fingers were quite sore after holding it together for about 2 minutes.
I put it all back together and everything works again. Interior lights, rear hatch switch.
I spent zero on the repair. Now time will tell how log it will last.
I just love cheap! LOL
If it isn't broke, I haven't fixed it yet....
SPONSOR AD:: (Our Sponsors help support C4VR)
Shoot. Well, at least it was a learning experience. Too bad you can't use duct tape. I hear that works on everything 
~Laurie~
1985 and 1995 coupes:
I think I'm going to have to fix it again. Absolutely nobody has the switch. Discontinued everywhere.
|UPDATED|7/24/2013 12:44:01 PM (AZT)|/UPDATED|
Anyone have a parts car? 90-96 that would like to sell me one or two?
I found one on ebay today and bought it. Absolutely not produced anymore. There are Corvette salvage yards that do have them. Quoted price $20 each used. I'll be saving the broken one. :)
|UPDATED|7/24/2013 12:44:01 PM (AZT)|/UPDATED|
If it isn't broke, I haven't fixed it yet....
in Forum: C4 Electrical
SPONSOR AD: (Our Sponsors help support C4VR)