Home page
SPONSOR AD

Topic: removal of Bose door speaker amplifiers from 89 C4.

in Forum: C4 Electrical

removal of Bose door speaker amplifiers from 89 C4.

Posted: 6/4/13 2:24pm Message 1 of 3
Standard Member
Send PM
Joined: 10/27/2012
Posts: 3
Any information on removing Bose speaker amplifiers?  Removed the door cards, miscellaneous rods, locks and hardware, but still can't remove the speaker box and amplifiers.  Are they glued in to door panels or what.?


SPONSOR AD:: (Our Sponsors help support C4VR)

Re: removal of Bose door speaker amplifiers from 89 C4.

Posted: 6/4/13 9:24pm Message 2 of 3
Profile Pic
Standard Member
Send PM
Hemet, CA - USA
Joined: 3/24/2013
Posts: 22
Vette(s): 1986 convertible, bright red, white top, red interior
I found that the Bose speaker amplifier units in the door of my 1986 were attached with 4 bolts and were sealed with a type of very sticky calk material. I very carefully worked a small putty knife around the edge of the housing from the inside of the door. Once the seal was broken I was able to carefully pry the housing loose. Good luck working inside the door can be challenging, lost some skin off my knuckles.


Re: removal of Bose door speaker amplifiers from 89 C4.

Posted: 6/7/13 4:16am Message 3 of 3
Profile Pic
Standard Member
Send PM
NORTON, OH - USA
Joined: 7/9/2012
Posts: 111
Vette(s): 1985 C4 red, 1985 C4 Black and dark gray
yep they use some damm good adheasive caulk but they come out    I put some pioneer round speakers in the bose box   with a little help from my air saw and sheet metal  good luck  that took up my whole weekend


in Forum: C4 Electrical


SPONSOR AD: (Our Sponsors help support C4VR)