Home page
SPONSOR AD SPONSOR AD

Topic: Slave Clutch Cylinder

in Forum: C4 Engines, Driveline and Handling


Slave Clutch Cylinder

Posted: 2/16/10 4:42pm Message 1 of 4
Standard Member
Send PM
Joined: 11/23/2009
Posts: 13
Vette(s): 1992 Corvette Coupe LT1 Six Speed
It is almost Corvette season and in Minnesota, we can't wait!
I noticed recently that I have a slight leak below where I believe the slave clutch cylinder is located.
I had planned to replace the Master Clutch Cylinder this spring which also has a bit of a leak.
I own a 1992 Corvette LT1 Six Speed with only 48,000 miles so I believe it is probably an age thing.
Is this a complicated fix?
I will get the car up on a lift this spring when I take it out again and want to be planning for what I need to do.
If anyone has any experience with replacing these, I would appreciate all input.
Do you recommend a mechanic or is this something that I can do if I get the car on a hoist?Confused

Thank you,
Russ...




SPONSOR AD:: (Our Sponsors help support C4VR)

Slave Clutch Cylinder

Posted: 2/16/10 9:09pm Message 2 of 4
Profile Pic
Standard Member
Moderator
Send PM
Duncanville, TX - USA
Joined: 3/18/2009
Posts: 2250
Vette(s): 1985 Coupe-L98/Auto,Bright Red/Carmine. 1974 Coupe-L48/4speed, Medium Red Metallic/Black Deluxe.
Hmmmm....does the '92 have the slave cylinder on the outside of the bellhousing(driver side) like the earlier cars? If so, it's fairly easy to swap. The hard part is bleeding it! 


Joel Adams  
My Link

 
   
(click for Texas-sized view!)             NCRS

"Money can't buy happiness -- but somehow it's more comforting to cry in a CORVETTE than in a Kia"

Slave Clutch Cylinder

Posted: 10/20/10 7:26pm Message 3 of 4
Profile Pic
Standard Member
Send PM
Olney, MD - USA
Joined: 10/20/2010
Posts: 51
Vette(s): 93 Polo Green Convertible with Bilstein Shocks, Autopower RollBar, Simpson 5 point harness, Grand Sport wheels, bald tires and dirty air filter! 2003 Anniversary Red 50th Anniversary Convertible
If you can put the car on a lift, it makes it real easy.  I had to suffer with jackstands, but got the job done.  Before putting the cylinder in I bench -bled it.  that made the bleeding much easier.


Don't wait too long on the leak.  Driving with the leaky slave cylinder causes transmission wear that could get expensive.  That's why i got a good deal on my C4.  I bought it with leaky slave and almost no second gear.  I fixed the slave and can now shift (gingerly) to second. A rebuild is about the same price as a new transmission.

Good Luck!  
(PS think about doing the master cylinder at the same time.)



Rarely indicted, never convicted

Slave Clutch Cylinder

Posted: 10/21/10 5:47am Message 4 of 4
Standard Member
Send PM
Joined: 11/23/2009
Posts: 13
Vette(s): 1992 Corvette Coupe LT1 Six Speed
Thank you for the info.
I did take it to a local mechanic who did the job this past spring.
I understand that bleeding out the lines is a long and messy job 
so I figured it would be best to spill on their floor than mine.
Everything works great.

Russ...



in Forum: C4 Engines, Driveline and Handling


SPONSOR AD: (Our Sponsors help support C4VR)