Home page
SPONSOR AD

Support our Vendors!  |  Advertise Here

Topic: Sawblade Wheel Rolling side Table....Thoughts?

in Forum: C4 General Discussion


Already a Member?
Login
Not yet a Member?
Register for Free!

Sawblade Wheel Rolling side Table....Thoughts? (1/3)
 10/7/24 8:52am
PrideandDream
Standard Member
Send Private Message

Newnan, GA - USA

Vette(s):
1996 LT1, Automatic, Coupe, Torch Red, Black Interior


Joined: 1/9/2022
Posts: 1

All

I had put a photo of this up on another forum as well but thought I'd get your opinions on this here too.  This wheel is from a 1994 I had that was wrecked.  I stripped and sanded it smooth.  Ordered a custom glass top, a custom wide base wheel stand, new lug nuts, lugs, and caps, and a new center piece, and then put it on an adjustable wheel base (actually made for potted plants) so I can roll it around and out of the way in the garage.  Thoughts on this?  Would this be something others are interested in?  If so what's one worth?  I know what I've got in it but that might be way more than the average person is interested in.  Anyway, thought I'd share and see if there's any feedback.   Even if you just think it's cool or a waste of money, which was generally my wife's opinion!  HA!  


 

Our Sponsors help support C4VR
Re: Sawblade Wheel Rolling side Table....Thoughts? (2/3)
 10/9/24 10:15am
Bob DeCardenas
Standard Member
Send Private Message

Cocoa, FL - USA

Vette(s):
1990 C4 convertible Polo green/tan interior&top 1991 C4 ZR-1 red/tan 2020 C8 coupe Rapid blue/silver stripe/red interior


Joined: 8/21/2022
Posts: 32

That’s pretty cool! Definitely a conversation piece. 

Re: Sawblade Wheel Rolling side Table....Thoughts? (3/3)
 10/14/24 6:55pm
Stanp321
Standard Member
Send Private Message

Cocoa, FL - USA

Vette(s):
1986 Convertable, Indy pace car. Red with black top, automatic. Bought from Goodwill without keys! Running now after replacing ignition and finding correct VATS.


Joined: 11/2/2023
Posts: 9

I think it would be even better with a tire on it and a tall table for bar stools.  It would have to have a sturdy base to keep from toppling over.

It would be expensive, but a definite conversation piece!

Great use out of a loss. 🤒

Our Sponsors help support C4VR