Topic: GPS Mount
in Forum: C4 Interior
Already a Member?
Click Here to Login
Not yet a Member?
Click Here to Register for Free!
I had trouble reading my GPS when it was mounted on a sandbag mount on the dash, so I bolted part of the mount to one of the screws holding the AC vent in place. Then I got annoyed with the cord hanging down the middle of the dash, so I removed the console cover and routed it underneath and connected it to the accessory ignition controlled wires under the console cover.

|UPDATED|7/1/2015 4:51:27 PM (AZT)|/UPDATED|
|UPDATED|7/1/2015 4:51:27 PM (AZT)|/UPDATED|
SPONSOR AD:: (Our Sponsors help support C4VR)
Standard Member
Moderator
Send PM
Moderator
Joined: 3/20/2009
Posts: 611
Vette(s): Black 1979 L-82
Black 1996 LT1
Black 1999 Coupe
Good idea.
Standard Member
Send PM
Scottsdale, AZ - USA
Joined: 7/8/2014
Posts: 31
Vette(s): 1988 Dark Red Metallic Convertible with sports seats, Delco/Bose radio system, Z52 suspension
I like the idea of this but is it possible to post a picture of the installation and maybe a diagram showing which wires to spliced into? It would help a lot. Thanks
Kettsvette said:
I like the idea of this but is it possible to post a picture of the installation and maybe a diagram showing which wires to spliced into? It would help a lot. Thanks
Your wish is my command. Here are the two pages from my '95 owners manual where I learned about the accessory plug wires in the Vette. I don't know if all years of C4 have these, but the 1995 model does. If you would like more pictures of the steps I went through with my GPS mounting and wiring, let me know and I will post more of the actual process.


|UPDATED|7/1/2015 4:49:20 PM (AZT)|/UPDATED|
in Forum: C4 Interior
SPONSOR AD: (Our Sponsors help support C4VR)