Home page
SPONSOR AD

Topic: instructiions or video for replacing trans shift panel light blub

in Forum: C4 Interior

instructiions or video for replacing trans shift panel light blub

Posted: 8/13/14 6:50pm Message 1 of 3
Standard Member
Send PM
Joined: 7/4/2014
Posts: 2
Vette(s): 1994 C4 Std. Coupe
I am seeking help to locate instructions on removing the center shift consule on a 94 C4 so I can replace the trans shift light. Just bought the car two months ago and I restoring it to show quality. Thanks

Rick



SPONSOR AD:: (Our Sponsors help support C4VR)

Re: instructiions or video for replacing trans shift panel light blub

Posted: 2/24/17 7:02pm Message 2 of 3
Profile Pic
Standard Member
Send PM
Joined: 7/26/2015
Posts: 34
Vette(s): 1993 coupe 100% original polo green
Hey fellow vetter I have a93' automatic start console removal by removeing 5 Philps screws 2 are straight ahead , one is under ash tray and final 2 are hidden under felt in forward left and right corners of cd rack . Use a small straight flat screw driver to " wedge" out Shifter button and there is a small snap ring around shifter to keep leather boot in place . So 5 screws, 1 snap ring , and console piece should strait up. I also took the junk box lid off to get it out of my way. The shift light bulb is a turn and lock set-up when putting back together be careful to set plastic shift indicator ove the horizontal rod that is attached to shifter Hope all this wasn't to confusing good luck


Re: instructiions or video for replacing trans shift panel light blub

Posted: 2/25/17 12:47pm Message 3 of 3
Profile Pic
Standard Member
Send PM
Joined: 7/26/2015
Posts: 34
Vette(s): 1993 coupe 100% original polo green
Hi again. Please let me amend previous message, there ar only. 3 screws , 7 mm needed to remove the console , the front two are guide tabs to align the console Sorry if I misseled you the rest of my message is correct it's been a while since I had. Console apart


in Forum: C4 Interior


SPONSOR AD: (Our Sponsors help support C4VR)