Home page

Topic: instructiions or video for replacing trans shift panel light blub

in Forum: C4 Interior

instructiions or video for replacing trans shift panel light blub (1/3)
 8/13/14 9:50pm
ctipresident
Standard Member
Send Private Message


Vette(s):
1994 C4 Std. Coupe


Joined: 7/4/2014
Posts: 2

I am seeking help to locate instructions on removing the center shift consule on a 94 C4 so I can replace the trans shift light. Just bought the car two months ago and I restoring it to show quality. Thanks

Rick
Our Sponsors help support C4VR
Re: instructiions or video for replacing trans shift panel light blub (2/3)
 2/24/17 10:02pm
PoloGreen93
Standard Member
Send Private Message


Vette(s):
1993 coupe 100% original polo green


Joined: 7/26/2015
Posts: 34

Hey fellow vetter I have a93' automatic start console removal by removeing 5 Philps screws 2 are straight ahead , one is under ash tray and final 2 are hidden under felt in forward left and right corners of cd rack . Use a small straight flat screw driver to " wedge" out Shifter button and there is a small snap ring around shifter to keep leather boot in place . So 5 screws, 1 snap ring , and console piece should strait up. I also took the junk box lid off to get it out of my way. The shift light bulb is a turn and lock set-up when putting back together be careful to set plastic shift indicator ove the horizontal rod that is attached to shifter Hope all this wasn't to confusing good luck
Re: instructiions or video for replacing trans shift panel light blub (3/3)
 2/25/17 3:47pm
PoloGreen93
Standard Member
Send Private Message


Vette(s):
1993 coupe 100% original polo green


Joined: 7/26/2015
Posts: 34

Hi again. Please let me amend previous message, there ar only. 3 screws , 7 mm needed to remove the console , the front two are guide tabs to align the console Sorry if I misseled you the rest of my message is correct it's been a while since I had. Console apart
Our Sponsors help support C4VR