Back to top of thread
Black SharkQuality - THIS IS VERY IMPORTANT!!! The image file must be of a substantial quality in regards to DPI (eg. 300) and Resolution (eg. 1760x1168). The higher these numbers are, the better it will look when printed, especially on a calendar. You'll probably need a 2.1 megapixel camera or better, set at the highest quality setting possible.
A good clue to picture size is the size of the photo file. If the file is greater than 2,000 bytes (or 2MB), then it is likely big enough. Any smaller, is likely unusable!
*** THIS IS THE NUMBER ONE REASON PHOTOS ARE NOT SELECTED!!
Yup!
Because when you take a photo file and print it on an 8-1/2" x 11" paper it becomes pixelated (blocky) if the file isn't large enough to support being printed that large.
It's also the reason why I haven't posted a photo of any of mine.
I have so little photos, and they are all small that would turn grainy
202052272842r.jpg "click to update your profile pic")
ZWILD1The only pics I have that are large enough taken professionally at the NCM Motorsport park. You say no people ? Some of the photos clearly show the driver in car? Would this disqualify the photos? Thank you.
Adam WartellThe only pics I have that are large enough taken professionally at the NCM Motorsport park. You say no people ? Some of the photos clearly show the driver in car? Would this disqualify the photos? Thank you.
To keep in just about the Vettes, no people or other non-Corvettes can be in the pictures.
Thank you.
JAMES
D.R. GrantHi Adam... pics for 2021 Calendar.
Member: D.R Grant
1986 Corvette Convertible, Indy Pace Car, L89 350 TPI cu in. , 235 HP.
Purchased: August 2018
Photo: Friends mock Texaco 1950's service station.
Name ( if selected): D.R Grant, Springfield, IL, USA
D.R. GrantAdam... 1986 Corvette, my mistake L98 TPI, not L89 TPI... thx D.R Grant
Superc63Morning,
Is there a link to the 2021 Calendars?
Thanks,
Chris
NickWilsonI doubt it ready yet.
Adam WartellMorning,
Is there a link to the 2021 Calendars?
Thanks,
Chris
Not yet. It is still being created. An announcement should be coming soon. Possibly as early as tomorrow. Stay tuned!
Superc63Im on the edge of my seat!
Thanks, Chris
Adam WartellIm on the edge of my seat!
Thanks, Chris
You can get off the edge now!
https://www.c4vetteregistry.com/vrforums/official-c4-vette-registry-news-and-information/2021-c4vr-member-calendar-now-available-for-purchase/541824/
