Home page
SPONSOR AD

Topic: my 1987 C4 production test car

in Forum: Show off your C4!

my 1987 C4 production test car

Posted: 11/13/13 9:08am Message 1 of 6
Profile Pic
Standard Member
Send PM
Shelby Twp., MI - USA
Joined: 10/2/2013
Posts: 8
Vette(s): 1987 rare two tone silver beige medium brown with the optional 3.07 rear end mated to 4 speed automatic. The build sheet states that this is a production test car, sent to milford proving grounds for testing. 78,000 miles with original paint.
I bought this car 2 years ago from of all places harley-davidson dealership. Priced well below what the value of the car is. I know c4's are not that hard to come by very cheap but this one has had extensive work done. the L 98 has been worked over and is now producing 410 horse at the wheels. Full stainless steel exhaust system Magnaflow from the headers down. Only 447 c4 in 87 were made in this two tone color 59u/69l silver beige/med. Brown. Also the car was ordered with 700r4 auto and the optional 3.07 rearend (standard on manual). I also found out from the build sheet that this is a production test car. Stated on build sheet that the car was diverted in transit to milford proving grounds for testing. Hope you enjoy my car as much as I do. Harold



|UPDATED|11/13/2013 9:08:48 AM (AZT)|/UPDATED|



SPONSOR AD:: (Our Sponsors help support C4VR)

Re: my 1987 C4 production test car

Posted: 10/2/13 10:03am Message 2 of 6
Former Member
Send PM
Joined: 4/4/2009
Posts: 254
87c4corvette said:I also found out from the build sheet that this is a production test car. Stated on build sheet that the car was diverted in transit to milford proving grounds for testing.

What is the Zone/Dealer number on your build sheet? I'd be curious to know the exact wording, and whether it is handwritten or typed text. While "build sheet anomalies" are unusual, they are often misinterpreted, or deciphered incorrectly. If you're willing to share, I'd like to know more about the "diverted in transit".  Knowing the zone/dealer number will help me with the deciphering of this statement.

The early c4's with two-tone paint in any colors are so "very 80's", and not very common on the road today, or at shows. My favorite is the white/silver, which is the least prolific of the two-tones. Neat car. Thanks for sharing.


Re: my 1987 C4 production test car

Posted: 11/13/13 9:09am Message 3 of 6
Profile Pic
Standard Member
Send PM
Shelby Twp., MI - USA
Joined: 10/2/2013
Posts: 8
Vette(s): 1987 rare two tone silver beige medium brown with the optional 3.07 rear end mated to 4 speed automatic. The build sheet states that this is a production test car, sent to milford proving grounds for testing. 78,000 miles with original paint.
Here is copies of my build sheet. Hope that helps. Let me know what you find out. Thanks Harold



|UPDATED|11/13/2013 9:09:41 AM (AZT)|/UPDATED|



Re: my 1987 C4 production test car

Posted: 11/13/13 9:10am Message 4 of 6
Profile Pic
Standard Member
Send PM
Shelby Twp., MI - USA
Joined: 10/2/2013
Posts: 8
Vette(s): 1987 rare two tone silver beige medium brown with the optional 3.07 rear end mated to 4 speed automatic. The build sheet states that this is a production test car, sent to milford proving grounds for testing. 78,000 miles with original paint.

Re: my 1987 C4 production test car

Posted: 11/13/13 9:17am Message 5 of 6
Profile Pic
Standard Member
Send PM
Winchester, KY - USA
Joined: 9/8/2013
Posts: 12
Vette(s): 1996 Collector Edition Coupe, Black Interior, GranSport Wheels. Previous Corvettes: 1972 LT-1 Black (original color Steel Cities Gray) Convertible with both tops, 1977 L-48 Black on Black t-top.

Re: my 1987 C4 production test car

Posted: 11/13/13 8:28pm Message 6 of 6
Profile Pic
Standard Member
Send PM
Shelby Twp., MI - USA
Joined: 10/2/2013
Posts: 8
Vette(s): 1987 rare two tone silver beige medium brown with the optional 3.07 rear end mated to 4 speed automatic. The build sheet states that this is a production test car, sent to milford proving grounds for testing. 78,000 miles with original paint.
I made the license plate where I work. I can do custom ones if you like and are interested. They are made out of stainless steel. I painted mine to match the trim.


in Forum: Show off your C4!


SPONSOR AD: (Our Sponsors help support C4VR)