Home page
SPONSOR AD

Support our Vendors!  |  Advertise Here

C4 Corvette Tips and Tricks

Interior
Body
Electrical
Engine
Exhaust & Emissions
A/C & Heating
Brakes, Steering & Suspension
Transmission
Care & Maintenance
Cleaning Alloy Rims  - Submitted by: 82dukman
   First I started sanding off all of the clear coat with #200 grit sandpaper. Then after that was done, I progressed to #400, for the whole wheel and finally finished up with #1500 grit. The sandpaper is the wet aluminum oxide type, but I did it dry. Make sure you go AROUND the wheel not up and down. After I was done with all of these steps, I polished them with Mothers Mag Wheel Cleaner.
Just so you know, it took my 3 hours per wheel, so it is a slow process. They came out looking like chrome, and you can have them clear coated if you want, but I didn't.
This was done due to the rims having curb marks on them. This process if done slowly, will remove all scratches in the rim. If there are bad scrapes, a Dremel tool can be used to grind down the affected part. This can also be done with chemical stripper to remove the clear coat. I chose not to go with that route.
Cleaning Aluminum Rims
Cleaning Glass
Cleaning Plastic Lenses
How to Shine Tires in a Pinch
Scratch Removal
Zaino - Getting started
Zaino - When to apply after a new paint job
Zaino - Which to start with after a new paint job
Restoration


If you'd like to submit a Tip, please Contact Us